ECO LINE

LINE DETECTOR

The ECO line detector brings together the technology used in our ARDEA S and the BOOMERANG S in a single system. ECO is presented to the market differently from the other two detectors referred to, ECO being the idea for a fire detection system for use in civil, artistic and church buildings, and completes the range of line detectors that we produce. ECO is special in that it embodies the principle of having both a reflection system detector or a Transmission and Reception system in a single model. The new microprocessor is capable of managing the sensitivity and the modulation in relation to smoke, to make this model something quite new in the field of line detection. It is essentially based on the detection principles of the ARDEA, but unlike the ARDEA it has all the functions integrated into one system, i.e. it does not need an external interface for the remote managing of ALARM and FAULT events or for the connection with the control units. ECO, in the reflection version can also be used with a special flush housing. It has a new and very useful swivel coupling code SSM which allows installation even in the most critical condition. The detecting ability for the various models, having regard to current regulations(EN54-12 and EN54-14) are the following:



ES50

This is a new generation reflection system detector. It has the same basic characteristics and the same potential as the other ECO system below described, but it can work with just a single power supply source, to further simplify installation problems, especially in those places where even passing a small cable may be difficult.



ES25-I

The ES25 (flush mounted reflector system) version can, by means of diaphragms that reduce its minimum capacity, detect fires in very small spaces without disturbing the appearance of furnishings and special architectural features.



ES80

This is a new generation reflection system detector. It has the same basic characteristics and the same potential as the other ECO models, but it can work with just a single power supply source, to further simplify installation problems, especially in those places where even passing a small cable may be difficult. The ES80, detect fires in theatre and historical buildings with wide spaces without disturbing the appearance of furnishings and special architectural features.



ES100

A compact line smoke detector (Tx-Rx) that has been specially designed to solve installation problems associated with civil buildings such as museums, places of special artistic interest and churches, while it may also be installed in industrial spaces not requiring protection ratings higher than IP44. Electrical supply 12-24V without commutation, low absorption under any conditions and chemical gold circuitry with lead free soldering. The integral interface and signal redundancy possibility make the ECO a highly reliable and secure line smoke detector system.