CLI

CONTROLLER FOR BEAM DETECTOR ILIA LINE

CONTROLLER for programming, managing, monitoring, calibrating, and performing remote tests for Linear Detectors of the ILIA line.

ERHS0712, ILIA Tx / Rx version.

ERRHS0712, ILIA Reflection version TRx.

ERHS0712-1013, ILIA Tx / Rx version RAL 1013 PEARL WHITE.

ERRHS0712-1013, ILIA Reflection version TRx RAL 1013 PEARL WHITE.

ERHS0712-PRO, ILIA Tx / Rx PRO version.

ERHS0712-PRO-L, ILIA Tx / Rx PRO version WITH DUST PROOF EXTENSION PIPE.

STANDARD

EN54-12, Linear beam detector; EN54-18, input/output modules for fire detection plants. The certification makes it possible to install the system for protection up to 12,000 sqm in full configuration with 8 ILIA detectors and redundant power supply.

FEATURES

• Connection from 1 to 8 ILIA detectors, even of different model. Expansion board up to 8 detectors (optional).
• Alarm and fault outputs for each individual detector connected.
• Pre-alarm outputs, in the PRO version only, distinct for each single detector.
• General alarm outputs, fault (delayed), maintenance request and pre-alarm (this last feature only in the version PRO).
• Double RS485 serial line for open lines or loop, even with one connected detector only.
• Double independent power input.
• Operational access to the programming keyboard protected by password.
• Selectable language menu (ITALIAN / ENGLISH / GERMAN/ POLISH).
• Clock and Calendar.
• 128×64 pixel graphic display with full event description.
• Store events for each single detector, with real-time status analysis and recording range adjustable by menu.
• Store event and time logs. Possibility to read logs from PC via USB.
• Alarms reset by specific menu and / or control panel via dedicated reset input.
• Cabling facilitation.
• N° 20 cable inputs from the bottom side.
• Predisposition for internal mounting plate and DIN rail.
• Field installation at ground level.
• Protection rate IP65.
• RoHS Compliance.
• Full compatibility with ILIA line detectors as in Tx-Rx version that in Reflection version, produced since May 2009 and with short isolator base.
• Available in versions: CLI or CLI – PRO

AVAILABLE VERSIONS

CLI

Version change selectable by menu: CLI, for standard civil and industrial environments, in the absence of dust, steam or vapors in suspension. DUST, for environments with intense vapors, dust and suspended aerosols. FROST, for environments with water vapor or mists in the working phases, open sheds cold storages.

CLI-PRO

For installations in environments where high sensitivity with double alarm thresholds is needed. NOTE version to be combined exclusively with the ERHS0712-PRO or PRO-L models.

COMPATIBILITY OF ILIA MODELS